Download DJI Assistant 2 for Windows 10

DJI assistant 2 It is a very useful tool if you have a drone DJI, and everyone should have it! I have the version 1.1.2 available for download. I downloaded this from DJI Web site before you replace it with a new one.

Download DJI Assistant 2 version 1.1.2

Dji Assistant per Mac
Dji Assistant per Windows

In later versions you lose the ability to mod, but with version 1.1.2 you can still edit parameters if you want to. These are the download 1.1.2, The latest version is completely down in the post, and is a download directly from DJI

* NOTE *
You can not install it normally on a Windows computer 8/10.
The drivers are not signed properly and Windows will not install them.
Is there a way to disable driver signing, and this is a standard feature in Windows.
Le istruzioni complete di installazione per l’installazione su Windows 8 e 10 sono nella parte inferiore di questo articolo.

Cos’è DJI Assistant?

Assistente consente di aggiornare il firmware, calibrare i sensori e persino leggere i registri.
puoi anche effettuare il downgrade a un firmware precedente, se lo desideri. Assistente è molto utile quando un aggiornamento della scheda SD non è riuscito e il drone è bloccato nel modo di aggiornamento.
Anche l’aggiornamento del firmware tramite Assistant 2 è molto più veloce.

Hai anche un’opzione per il simulatore in modo da poter pilotare un drone simulato con il tuo telecomando 🙂

L’assistente DJI è disponibile per Windows e Mac, qui è l’ultima versione direttamente da DJI.

DJI Assistant 1.2.3 Windows

DJI Assistant 1.2.3 Mac

NOTE:

The installation of this tool on Windows 8 O 10 It requires booting in Safe Mode.
This is because 2 necessary drivers are not, or not properly signed, and Windows 8 e 10 They will not allow the installation when they are running in mode “normal”

To get into Safe Mode and disable the driver signing requirements, Proceed as follows.

  • Click the Start menu and select Settings.
  • Then click Update and safety.
  • Then click Restore.
  • Click Restart now in an advanced Start.
  • then click Troubleshooting.
  • then select Advanced Options.
  • then select Startup Settings.
  • Now click Restart.
  • On the start screen, press Settings 7 or F7 to disable the application of the driver signing.

Install DJI Assistant as usual, the drivers will be installed and you will be able to use the assistant DJI.
After installation, restart the PC to run mode again “normal”.

Once the software is installed, you can use it like any other program, Safe Mode is only required during installation.
The drivers work in normal mode.

There are no installation problems reported for Mac!

Sharing is caring!